Users Guide
dot1p Queue ID
0 1
1 0
2 2
3 3
4 4
5 5
6 6
7 7
Command Modes
• INTERFACE
• CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Expanded the command to permit conguration on port channels.
6.1.1.1 Introduced on the E-Series.
Usage Information
To honor all incoming 802.1p markings on incoming switched trac on the interface, enter this command. By
default, this facility is not enabled (that is, the 802.1p markings on incoming trac are not honored).
Quality of Service (QoS) 1263