Users Guide
Version Description
6.1.1.1 Introduced on the E-Series.
Usage Information
Use this command to specify the name of the input QoS policy. Once input policy is specied, rate-police can be
dened. This command enables the qos-policy-input conguration mode— (conf-qos-policy-in).
When changing a Service-Queue conguration in a QoS policy map, all QoS rules are deleted and re-added
automatically to ensure that the order of the rules is maintained. As a result, the Matched Packets value shown in
the show qos statistics command is reset.
If you create create a QoS input policy to be used for CoPP, you must enter the keyword cpu-qos .
Related Commands
• rate police — incoming trac policing function.
qos-policy-output
Create a QoS output policy.
Syntax
qos-policy-output qos-policy-name
To remove an existing output QoS policy, use the no qos-policy-output qos-policy-name command.
Parameters
qos-policy-name Enter your output QoS policy name in character format (32 characters maximum).
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
1280 Quality of Service (QoS)