Users Guide
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information The default burst size is 100Kb. If a dierent value is required, you must congure the burst size to the required
value.
Related Commands
• rate police — species trac policing on the selected interface.
• qos-policy-input — creates a QoS output policy.
rate-shape
Shape trac output as part of the designated policy.
Syntax
rate-shape [kbps | pps] peak-rate [burst-kbps | burst-packets] commited [kbps |
pps] commited-rate [burst-kbps | burst-packets]
Parameters
pps Enter the keyword pps to specify the rate limit in packets per second (pps).
kbps Enter the keyword kbps to specify the rate limit in Kilobits per second (Kbps). Make the
following value a multiple of 64. The range is from 0 to 100000000. The default
granularity is Megabits per second (Mbps).
burst-kbps (OPTIONAL) Enter the burst size in KB. The range is from 0 to 40000. The default is 100.
burst-packets Enter the peak rate or committed rate burst size in packets per seconds.
Defaults Burst size is 10KB. Granularity for rate is Mbps unless you use the kbps option.
Command Modes QOS-POLICY-OUT
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
1282 Quality of Service (QoS)