Users Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 6.2.1.1 Introduced on the E-Series.
Usage Information To redistribute the default route (0.0.0.0/0), congure the default-information originate command.
Related Commands
• default-information originate — generates a default route for RIP trac.
redistribute isis
Redistribute routing information from an IS-IS instance.
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value]
[route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 |
level-2] [metric metric-value] [route-map map-name] command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1 routes.
level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-IS Level-1 and
Level-2 routes.
level-2 (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS Level-2 routes.
metric metric-value (OPTIONAL) Enter the keyword metric then a number as the metric value. The range is
from 0 to 16.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a congured route map.
Defaults Not congured.
Command Modes ROUTER RIP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Routing Information Protocol (RIP) 1337