Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6100-ON

1441

Version Description

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

Usage Information

Enabling RSA authentication allows the user to log in without being prompted for a password. In addition, the

OpenSSH compatible SSHv2 RSA public key must be added to the list of authorized keys (ip ssh rsa-

authentication my-authorized-keys device://filename command).

ip ssh server

Congure an SSH server. SSH server is enabled by default.

Syntax

NOTE: Some of the parameters in this command require licensing to access. For more information,

contact your Dell Networking representative.

ip ssh server {ciphers cipher-list} {enable | port port-number} [kex key-

exchange-algorithm] [mac hmac-algorithm] [version {1 | 2}]

To disable SSH server functions, use the no ip ssh server {ciphers cipher-list} {enable |

port port-number} [kex key-exchange-algorithm] [mac hmac-algorithm] [version {1

| 2}] command.

Parameters

enable Enter the key word enable to start the SSH server.

ciphers cipher-list Enter the keyword ciphers and then a space-delimited list of ciphers that the SSH

server supports. The following ciphers are available.

• 3des-cbc

• aes128-cbc

• aes192-cbc

• aes256-cbc

• aes128-ctr

• aes192-ctr

• aes256-ctr

The default cipher list is used.