Users Guide

Version Description
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information The authenticator completes authentication only when you set port-control to auto.
dot1x prole
Congure a dot1x prole to dene a list of trusted supplicant MAC addresses.
Syntax
[no] dot1x profile profile-name
Parameters
prole-name Enter a dot1x profile-name. The prole name length is limited to 32 characters.
Defaults None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Error Strings NONE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S3100 series, S4048–ON, S4048–ON, S4810, S4820T, S5000, S6000,
S6000–ON, S6100–ON, the Conguration Terminal Batch mode on C9010, Z9100–ON,
and Z9500.
9.9(0.0) Introduced on the C9010.
Usage Information
The dot1x profile command congures a dot1x prole to dene a list of trusted supplicant MAC addresses.
Maximum number of dot1x proles is limited to 10. This command launches dot1x prole mode for entering prole
related commands such as the mac command. The dot1x static-mab command assigns the dot1x prole to
an interface.
Use this command in Conguration Terminal Batch mode to congure the dot1x prole in a dual-homing setup.
Related Commands
• dot1x static-mab
• mac
802.1X 167