Users Guide

Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.5.1.0 Introduced
aggregate-address
To minimize the number of entries in the routing table, summarize a range of prexes.
Syntax
aggregate-address ip-address mask [advertise-map map-name] [as-set] [attribute-
map map-name] [summary-only] [suppress-map map-name]
Parameters
ip-address mask Enter the IP address and mask of the route to be the aggregate address. Enter the IP
address in dotted decimal format (A.B.C.D) and mask in /prex format (/x).
advertise-map
map-name
(OPTIONAL) Enter the keywords advertise-map then the name of a congured route
map to set lters for advertising an aggregate route.
as-set
(OPTIONAL) Enter the keyword as-set to generate path attribute information and
include it in the aggregate.
AS_SET includes AS_PATH and community information from the routes included in the
aggregated route.
attribute-map map-
name
(OPTIONAL) Enter the keywords attribute-map then the name of a congured route
map to modify attributes of the aggregate, excluding AS_PATH and NEXT_HOP
attributes.
summary-only (OPTIONAL) Enter the keyword summary-only to advertise only the aggregate
address. Specic routes are not advertised.
suppress-map map-
name
(OPTIONAL) Enter the keywords suppress-map then the name of a congured route
map to identify which more-specic routes in the aggregate are suppressed.
Defaults Not congured.
Command Modes
• ROUTER BGP ADDRESS FAMILY
Border Gateway Protocol 339