Users Guide

priority-pgid
Assign 802.1p priority trac to a priority group in a DCB map.
Syntax
priority-pgid dot1p0_group-num dot1p1_group-num dot1p2_group-num dot1p3_group-
num dot1p4_group-num dot1p5_group-num dot1p6_group-num dot1p7_group-num
Parameters
dot1p0–7_group-
num
Enter the priority group number for each 802.1p class of trac in a DCB map.
Defaults None
Command Modes DCB MAP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.3(0.0) Introduced on the S4810, S6000 platforms.
Usage Information
PFC and ETS settings are not pre-congured on Ethernet ports. You must use the dcb-map command to
congure dierent groups of 802.1p priorities with PFC and ETS settings.
Using the priority-pgid command, you assign each 802.1p priority to one priority group. A priority group
consists of 802.1p priority values that are grouped together for similar bandwidth allocation and scheduling, and
that share latency and loss requirements. All 802.1p priorities mapped to the same queue must be in the same
priority group. For example, the
priority-pgid 0 0 0 1 2 4 4 4 command creates the following groups
of 802.1p priority trac:
• Priority group 0 contains trac with dot1p priorities 0, 1, and 2.
• Priority group 1 contains trac with dot1p priority 3.
• Priority group 2 contains trac with dot1p priority 4.
• Priority group 4 contains trac with dot1p priority 5, 6, and 7.
To remove a priority-pgid conguration from a DCB map, enter the no priority-pgid command.
For PFC enabled priorities, it is recommended to map single priority per Priority group.
priority-group bandwidth pfc
Congure the ETS bandwidth allocation and PFC mode used to manage port trac in an 802.1p priority group.
Syntax
priority-group group-num {bandwidth percentage| strict-priority} [[committed |
peak ] | [peak | committed] {<0-10000>} [<0-10000>]] pfc {on | off}
498 Data Center Bridging (DCB)