Users Guide

Interface Queue# Lossless Buffer-size Pause-threshold Peak-headroom Resume-offset Shared Threshold
(KB) (KB) (KB) (KB) Weight
------------------------------------------------------------------------------------------------------------
Te 1/1/2 Q0 NO - - - - -
Te 1/1/2 Q1 NO - - - - -
Te 1/1/2 Q2 NO - - - - -
Te 1/1/2 Q3 NO - - - - -
Te 1/1/2 Q4 NO - - - - -
Te 1/1/2 Q5 NO - - - - -
Te 1/1/2 Q6 NO - - - - -
Te 1/1/2 Q7 NO - - - - -
Dell#
On interface on which PFC is enabled:
Dell(conf)#do show interfaces tengigabitethernet 1/1/1/2 pfc buffer-threshold
Interface TenGigabitEthernet 1/1/1/2
Interface Queue# Lossless Buffer-size Pause-threshold Resume-offset Shared Threshold
(KB) (KB) (KB) Weight
---------------------------------------------------------------------------------------------
Te 1/1/1/2 Q0 NO - - - -
Te 1/1/1/2 Q1 NO - - - -
Te 1/1/1/2 Q2 NO - - - -
Te 1/1/1/2 Q3 YES 200 40 9 8
Te 1/1/1/2 Q4 YES 200 40 9 8
Te 1/1/1/2 Q5 NO - - - -
Te 1/1/1/2 Q6 NO - - - -
Te 1/1/1/2 Q7 NO - - - -
Dell(conf)#
On interface in which PFC is not enabled:
Dell#show interface tengigabitethernet 1/1/1/1 pfc buffer-threshold
The following table describes the output elds displayed for the show interface pfc buffer-threshold
command:
Field Description
queue Number of the queue
lossless Whether the queue is a lossy or lossless queue for which buer threshold is congured
buer-size Ingress buer size
pause-threshold-
value
Buer limit at which the port sends the pause to peer in KB.
resume-threshold-
value
Buer oset limit at which the port resumes the peer in KB.
shared threshold
weight
Weightage of the priorities on the shared buer size in the system.
dcb pfc-queues
Congure the number of PFC queues.
Syntax
dcb pfc-queues value
Parameters
value Enter the number of PFC queues in the range of 0 through 4. The number of ports
supported based on lossless queues congured will depend on the buer.
Default The default number of PFC queues in the system is 2 for S4810 and 1 for S6000 platforms.
Command Modes CONFIGURATION mode
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
Data Center Bridging (DCB) 507