Users Guide
To delete the DHCP snooping binding entry from DHCP snooping database, use the [no] ipv6 dhcp
snooping binding mac address vlan-id vlan-id ipv6 ipv6-address interface
interface-type | interface-number lease valuecommand.
Parameters
mac address Enter the keyword mac then the MAC address of the host to which the server is leasing
the IPv6 address.
vlan-id Enter the keywords vlan-id then the VLAN to which the host belongs. The range is
from 2 to 4094.
ipv6 ipv6-address Enter the keyword ipv6 then the IPv6 address that is leased to the client.
interface type Enter the keyword interface then the type of interface to which the host is
connected:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the
stack/slot/port/subport information.
•
For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
interface number Enter the number of the interface.
lease value Enter the keyword lease then the amount of time the IPv6 address are leased. The
range is from 1 to 4294967295.
Defaults None
Command Modes
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-Series.
Dynamic Host Conguration Protocol (DHCP) 565