Users Guide
p-snooping fc-map
Congure the FC-MAP value FIP snooping uses on all VLANs.
Syntax
fip-snooping fc-map fc-map-value
To return the congured FM-MAP value to the default value, use the no fip-snooping fc-map command.
Parameters
fc-map-value Enter the FC-MAP value FIP snooping uses. The range is from 0EFC00 to 0EFCFF.
Defaults 0x0EFC00
Command Modes
• CONFIGURATION
• VLAN INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
p-snooping max-sessions-per-enodemac
Congure the maximum session limit per ENode MAC address.
Syntax
fip-snooping max—sessions—per—enode—mac max-sessions-value
To return the congured maximum sessions to the default value, use the no fip-snooping max—sessions—
per—enode—mac command.
Parameters
max-sessions-value Enter the maximum number of sessions allowed per ENode MAC address. The range is
from 1 to 64.
600 FIP Snooping