Users Guide

Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P2) Introduced on the S4038-ON.
9.8(0.0P5) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.2.1.0 Added support for 4093 VLANs on E-Series. Prior releases supported 2094.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information When creating an interface range, interfaces appear in the order they are entered; they are not sorted. The
command veries that interfaces are present (physical) or congured (logical).
Important Points to Remember:
• Bulk conguration is created if at least one interface is valid.
• Non-existing interfaces are excluded from the bulk conguration with a warning message.
• The interface range prompt includes interface types with stack/slot/port[/subport] information for valid
interfaces. The prompt allows for a maximum of 32 characters. If the bulk conguration exceeds 32 characters,
it is represented by an ellipsis ( ... ).
• When the interface range prompt has multiple port ranges, the smaller port range is excluded from the
prompt.
• If overlapping port ranges are specied, the port range is extended to the smallest start port and the biggest
end port.
• The interface range format for a 10G interface is stack/slot/port/subport.
• The interface range format for a 25GG interface is stack/slot/port/subport.
• The interface range format for a 40G interface is stack/slot/port[/subport].
• The interface range format for a 50G interface is stack/slot/port/subport.
• The interface range format for a 100G interface is stack/slot/port.
Example (Bulk)
Dell(conf)# interface range tengigbitethernet 1/1/1/1 - 1/1/2/4, fortyGigE
1/5/1, tengigbitethernet 1/1/3/1
% Warning: Non-existing ports (not configured) are ignored by
interface-range
Dell(conf)# interface range fortyGigE 1/10/1 - 1/12/4, HundredGigE 1/13,
fortyGigE 1/15/1
% Warning: Non-existing ports (not configured) are ignored by
interface-range
Interfaces 681