Users Guide
Version Description
8.3.11.1 Introduced on the Z9000. Added support for the SSD on the Z9000 only.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added support for TFTP and SCP.
7.6.1.0 Introduced on the S-Series.
Usage Information
RFC 3986 species that IPv6 host addresses in a uniform resource identier (URI) must be enclosed in square
brackets, [X:X:X:X::X]. For maximum exibility this command accepts IPv6 host addresses with or without the
square brackets.
After you upgrade the system image, by entering the command. specify the location where the Dell Networking OS
image used to boot the system is stored (boot system), save the conguration to the start-up cong le
(write memory), and reload the system (reload).
Example
Dell# upgrade system tftp://10.11.8.12/dv-rainier-13 a:
00:39:32 : Discarded 1 pkts. Expected block num : 51.
Received block num: 50
!00:39:36 : Discarded 1 pkts. Expected block num : 65.
Received block num: 64
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.......
...........!!!!!!!!!!!!!!!!!!!!!!!
93924044 bytes successfully copied
System image upgrade completed successfully.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Image upgraded to all
Dell#
rename
Rename a le in the local le system.
Syntax
rename url url
Parameters
url Enter the following keywords and a lename:
• For a le on the internal Flash, enter flash:// followed by the lename.
• For a le on an NFS mounted le system, enter nfsmount:// followed by the
mount point and le path.
•
For a le on an external USB drive, enter usbflash:// followed by the lename.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
70 File Management