Users Guide
Description
Total Entries Lists the total number of ARP entries in the ARP table.
Static Entries Lists the total number of congured or static ARP entries.
Dynamic Entries Lists the total number of learned or dynamic ARP entries.
CPU Lists which CPU the entries are stored on.
Example (Summary)
Dell# show arp summary
TotalEntries Static Entries Dynamic Entries CPU
----------------------------------------------
83 0 83 CP
Dell#
Related Commands
• ip local-proxy-arp — enable/disable Layer 3 communication in secondary VLANs.
• switchport mode private-vlan — set PVLAN mode of the selected port.
show arp retries
Display the congured number of ARP retries.
Syntax
show arp retries
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced.
IPv4 Routing 787