Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6100-ON
81828384858687888990
System Type: S6100-ON
Control Processor: Intel Rangeley with 3 Gbytes (3177226240 bytes) of memory,
core(s) 4.
8G bytes of boot flash memory.
1 4 Modules, 16x40G/8x100G ports TE/TF/FO/FI/HU G (S6100-ON)
2 Ten GigabitEthernet/IEEE 802.3 interface(s)
64 Forty GigabitEthernet/IEEE 802.3 interface(s)
upgrade boot
Upgrade the bootash image or bootselector image.
Syntax
upgrade boot {all | bootflash—image | bootselector-image}stack-unit {stack—unit
—id | all}{booted | flash: | ftp: | scp: | tftp: | usbflash:} {A: |B:}
Parameters
all Enter the keyword all to change both the bootash and bootselector images.
bootash-image Enter the keyword bootflash-image to change the bootash image..
bootselector-image Enter the keyword bootselector-image to upgrade the BIOS system image.
stack-unit-id Enter the stack–unit–id to upgrade only the mentioned stack-unit .
all Enter the keywords all to upgrade the member stack-units.
booted Enter the keyword booted to upgrade from the current image on the device.
ftp: Enter the keyword ftp to follow it with the location of the source le in this form: //
userid:password@hostip/lepath, or press Enter to launch a prompt sequence.
tftp: Enter the keyword tftp to follow it with the location of the source le in this form: //
hostlocation/lepath, or press Enter to launch a prompt sequence.
ash: Enter the keyword flash to follow it with the location of the source le in this form: //
lepath, or press Enter to launch a prompt sequence.
usbash: Enter the keyword flash to follow it with the location of the source le in this form: //
lepath, or press Enter to launch a prompt sequence.
A: Enter the keyword A to upgrade the bootash partition A:.
B: Enter the keyword B to upgrade the bootash partition B:.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
82 File Management