Users Guide
Version Description
8.3.12.0 Introduced on the S4810.
6.3.1.0 Introduced.
default-information originate
Generates a default route into an IS-IS routing domain and controls the distribution of default information.
Syntax
default-information originate [always] [metric metric] [route-map map-name]
To disable the generation of a default route into the specied IS-IS routing domain, use the no default-
information originate [always] [metric metric] [route-map map-name] command.
Parameters
always (OPTIONAL) Enter the keyword always to have the default route always advertised.
metric metric (OPTIONAL) Enter the keyword metric then a number to assign to the route. The range
is from 0 to 16777215.
route-map map-
name
(OPTIONAL) A default route the routing process generates if the route map is satised.
Defaults Not congured.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Added IPv6 ISIS support.
6.3.1.0 Introduced.
Intermediate System to Intermediate System (IS-IS) 847