Users Guide

Version Description
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added IPv6 ISIS support.
6.3.1.0 Introduced.
Related Commands
• distribute-list out — suppress networks from being advertised in updates.
• redistribute — redistribute routes from one routing domain to another routing domain.
distribute-list out
Suppress network prexes from being advertised in outbound updates.
Syntax
distribute-list prefix-list-name out [connected | bgp as number | ospf process-
id | rip | static]
To return to the default values, use the no distribute-list prefix-list-name out [bgp as
number connected | ospf process-id | rip | static] command.
Parameters
prex-list-name Specify the prex list to lter prexes in routing updates.
connected (OPTIONAL) Enter the keyword connected for directly connected routing process.
ospf process-id (OPTIONAL) Enter the keyword ospf then the OSPF process-ID number. The range is
from 1 to 65535.
bgp as number (OPTIONAL) Enter the BGP then the AS Number. The range is from 1 to 65535.
rip (OPTIONAL) Enter the keyword rip for RIP routes.
static (OPTIONAL) Enter the keyword static for user-congured routing process.
Defaults Not congured.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Intermediate System to Intermediate System (IS-IS) 851