Users Guide

Link Aggregation Control Protocol (LACP)

This section contains commands for Dell Networks’ implementation of the link aggregation control protocol (LACP) for creating dynamic

link aggregation groups (LAGs) — known as “port-channels” in the Dell Networking OS.

NOTE: For static LAG commands based on the standards specied in the IEEE 802.3 Carrier sense multiple access with collision

detection (CSMA/CD) access method and physical layer specications, see Port Channel Commands .

Topics:

• clear lacp counters

• debug lacp

• lacp long-timeout

• lacp port-priority

• lacp system-priority

• port-channel-protocol lacp

• show lacp

clear lacp counters

Clear port channel counters.

Syntax

clear lacp port-channel-number counters

Parameters

port-channel-

number

Enter a port-channel number. The range is from 1 to 4096.

Defaults Without a Port Channel specied, the command clears all Port Channel counters.

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

Link Aggregation Control Protocol (LACP) 911