Users Guide

VXLAN-INSTANCE mode
local-vtep-ip IP Address
4 Create a VNI prole to associate with remote VTEP conguration.
VXLAN-INSTANCE mode
vni—profile profile name
5 Associate VNID to the VNI prole.
VNI-PROFILE mode
vnid VNID Range
6 Create a remote tunnel and associate the remote VTEP to the VNID.
VXLAN-INSTANCE mode
remote—vtep—ip remote IP Address vni-profile profile name
7 Enable the VXLAN.
VXLAN-INSTANCE mode
no shutdown
8 Enable VXLAN instance on the interface. The interface should not be on layer 2.
INTERFACE mode
vxlan-instance Instance ID
9 Associate VNID to VLAN.
INTERFACE VLAN mode
vxlan-vnid VNID
Limitations on Static VXLAN
While conguring a static VXLAN, the following conditions apply:
• Static VXLAN is not supported in Stacking and VLT environments.
• Routing over VXLAN is not supported.
• SNMP and REST API are not supported for VXLAN congurations.
• Multicast over VXLAN is not supported.
• Only 4K VNIs are supported while conguring static VXLAN.
• In multicast and broadcast trac, even though the remote VTEP is reachable through the ECMP path, load balancing is not supported.
• The 802.1p QOS markings are not preserved in the tags that go through the VXLAN tunnel.
• Single VNI can be mapped to Single VLAN only.
• Only one Remote VTEP can be reached through a single interface in a broadcast domain.
Displaying Static VXLAN Congurations
To display the static VXLAN congurations, use the following commands.
Examples of the show vxlan-instance Command
The following example displays the basic conguration details.
Dell# show vxlan vxlan-instance 1
Instance : 1
Mode : Static
1004
Virtual Extensible LAN (VXLAN)