Users Guide
conguration is considered valid. The comma-separated list is not required to be separated by spaces in between the ranges. You can
associate multicast MAC or hardware addresses to an interface range and VLANs by using the mac-address-table static
multicast-mac-address vlan vlan-id output-range interface command.
Bulk Conguration Examples
Use the interface range command for bulk conguration.
• Create a Single-Range
• Create a Multiple-Range
• Exclude Duplicate Entries
• Exclude a Smaller Port Range
• Overlap Port Ranges
• Commas
• Add Ranges
Create a Single-Range
The following is an example of a single range.
Example of the interface range Command (Single Range)
Dell(config)# interface range tengigabitethernet 1/1/1/1 - 1/1/2/3
Dell(config-if-range-te-1/1/1/1-1/1/2/3)# no shutdown
Dell(config-if-range-te-1/1/1/1-1/1/2/3)#
Dell(config)# interface range hundredGigE 1/1/1-1/1/8
Dell(config-if-range-te-1/1/1-1/1/8)# no shutdown
Dell(config-if-range-te-1/1/1-1/1/8)#
Create a Multiple-Range
The following is an example of multiple range.
Example of the interface range Command (Multiple Ranges)
Dell(conf)#interface range tengigabitethernet 1/1/2/1 - 1/1/5/1 , tengigabitethernet 1/1/1/1 ,
vlan 1
Dell(conf-if-range-te-1/1/2/1-1/1/5/1,te-1/1/1/1,vl-1)#
Exclude Duplicate Entries
The following is an example showing how duplicate entries are omitted from the interface-range prompt.
Example of the Interface-Range Prompt for Duplicate Interfaces
Dell(conf)#interface range vlan 1 , vlan 1 , vlan 3 , vlan 3
Dell(conf-if-range-vl-1,vl-3)#
Dell(conf)#interface range tengigabitethernet 1/1/2/1 - 1/1/3/4 , tengigabitethernet 1/1/2/1 -
1/1/3/4 , tengigabitethernet 1/1/2/1 - 1/1/3/4
Dell(conf-if-range-te-1/1/2/1-1/1/3/4)#
Interfaces
393