Users Guide
 Monitor time: 00:00:00 Refresh Intvl.: 2s
Interface: Te 1/1/1/1, Disabled, Link is Down, Linespeed is 1000 Mbit
Traffic statistics: Current Rate Delta
 Input bytes: 0 0 Bps 0
 Output bytes: 0 0 Bps 0
 Input packets: 0 0 pps 0
 Output packets: 0 0 pps 0
 64B packets: 0 0 pps 0
 Over 64B packets: 0 0 pps 0
 Over 127B packets: 0 0 pps 0
 Over 255B packets: 0 0 pps 0
 Over 511B packets: 0 0 pps 0
Over 1023B packets: 0 0 pps 0
 Error statistics:
 Input underruns: 0 0 pps 0
 Input giants: 0 0 pps 0
 Input throttles: 0 0 pps 0
 Input CRC: 0 0 pps 0
 Input IP checksum: 0 0 pps 0
 Input overrun: 0 0 pps 0
 Output underruns: 0 0 pps 0
 Output throttles: 0 0 pps 0
m - Change mode c - Clear screen
l - Page up a - Page down
T - Increase refresh interval t - Decrease refresh interval
q - Quit
q
Dell#
Split 40G Ports on a 16X40G QSFP+ Module
You can only split the 40G ports in the top row (odd numbered ports) on a 16X40G module. If you congure 4X10G on a 40G interface, the 
subsequent even numbered interface is removed and unavailable for use.
The following example shows the interface status before splitting a 40G interface:
Dell# show interfaces status 
Port Description Status Speed Duplex Vlan 
Fo 1/3/1 Down 40000 Mbit Auto --
Fo 1/3/2 Down 40000 Mbit Auto --
The following example shows that when you split an interface on a 16X40G module, the subsequent even numbered interface is removed 
from the conguration.
Dell(conf)# stack-unit [stack-unit number] module [module number] port [port number] portmode 
quad speed 10G 
Warning: Enabling Quad mode on stack-unit 1 module 3 port 1. Please verify whether the configs 
related to interface Fo 1/3/1 Fo 1/3/2 are cleaned up before proceeding further.
[confirm yes/no]:y
Quad mode is enabled on stack-unit 1 module 3 port 1
The interface on stack-unit 1 slot 3 port 2 has been removed
%STKUNIT1-M:CP %IFMGR-5-DYNAMIC_FANOUT: Port 1 in module 3 and slot 1 has been fanned-out
The following example shows that the even numbered interface is removed from the conguration:
Dell# show interfaces status 
Port Description Status Speed Duplex Vlan 
Te 1/3/1/1 Up 10000 Mbit Full --
Te 1/3/1/2 Up 10000 Mbit Full --
Te 1/3/1/3 Up 10000 Mbit Full --
Te 1/3/1/4 Up 10000 Mbit Auto --
396
Interfaces










