Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6100-ON
1041104210431044104510461047104810491050
Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on all platforms.
Usage Information
The higher this parameter is set, the faster OSPF converge takes place.
NOTE: The faster the convergence, the more frequent the route calculations and updates. This
behavior impacts CPU utilization and may impact adjacency stability in larger topologies.
Generally, convergence level 1 meets most convergence requirements. Higher convergence levels should only be
selected following consultation with Dell Networking technical support.
ood-2328
Enable RFC-2328 ooding behavior.
Syntax
flood-2328
To disable, use the no flood-2328 command.
Defaults Disabled.
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Open Shortest Path First (OSPFv2 and OSPFv3) 1045