Users Guide
line
Enable and congure console and virtual terminal lines to the system. This command accesses LINE mode, where you can set the access
conditions for the designated line.
Syntax
line {console 0 | vty number [end-number]}
Parameters
console 0 Enter the keyword console 0 to congure the console port. The console option is
<0-0>.
vty number Enter the keyword vty then a number from 0 to 9 to congure a virtual terminal line for
remote sessions. The system supports 10 remote sessions.
end-number (OPTIONAL) Enter a number from 1 to 9 as the last virtual terminal line to congure. You
can congure multiple lines at one time.
Defaults Not congured
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
Usage Information You cannot delete a terminal connection.
Related Commands
• access-class — restricts the incoming connections to a particular IP address in an IP access control list (ACL).
• password — species a password for users on terminal lines.
110 Control and Monitoring