Users Guide
ipv6 ospf graceful-restart helper-reject
Congure an OSPFv3 interface to not act upon the Grace LSAs that it receives from a restarting OSPFv3 neighbor.
Syntax
ipv6 ospf graceful-restart helper-reject
To disable the helper-reject role, enter no ipv6 ospf graceful-restart helper-reject.
Defaults The helper-reject role is not congured.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.4.2.2 Introduced on E-Series.
8.3.19.0 Introduced on the S4820T.
Usage Information
By default, OSPFv3 graceful restart is disabled and functions only in a helper role to help restarting neighbor
routers in their graceful restarts when it receives a Grace LSA.
When congured in a helper-reject role, an OSPFv3 router ignores the Grace LSAs that it receives from a
restarting OSPFv3 neighbor.
The graceful-restart role command is not supported in OSPFv3. When you enable the helper-reject role on an
interface, you recongure an OSPFv3 router to function in a “restarting-only” role.
ipv6 ospf hello-interval
Specify the time interval between the hello packets sent on the interface.
Syntax
ipv6 ospf hello—interval seconds
1126 Open Shortest Path First (OSPFv2 and OSPFv3)