Users Guide
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.4.2.1 Support for the optional guard keyword was added on the C-Series, S-Series, and E-
Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.4.1.0 Expanded to display port error disable state (EDS) caused by loopback BPDU
inconsistency and Port VLAN ID inconsistency.
6.2.1.1 Introduced.
Usage Information The following describes the show spanning-tree pvst command shown in the following examples.
Field Description
Interface Name PVST interface.
Instance PVST instance.
Sts Port state: root-inconsistent (INCON Root), forwarding (FWD), listening (LIS), blocking
(BLK), or shut down (EDS Shut).
Guard Type Type of STP guard congured (Root, Loop, or BPDU guard).
Example (Brief)
Dell# show spanning-tree pvst vlan 3 brief
VLAN 3
Executing IEEE compatible Spanning Tree Protocol
Root ID Priority 4096, Address 0001.e801.6aa8
Root Bridge hello time 2, max age 20, forward delay 15
Bridge ID Priority 16384, Address 0001.e805.e306
Configured hello time 2, max age 20, forward delay 15
Per-VLAN Spanning Tree Plus (PVST+) 1203