Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6100-ON

1391

Version Description

9.10(0.0) Introduced on the S6100-ON.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

Usage Information This command species the maximum number of attempts to authenticate a user on an SSH connection with the

remote host for password authentication. SSH disconnects when the number of password failures exceeds

authentication-retries.

ip ssh connection-rate-limit

Congure the maximum number of incoming SSH connections per minute.

Syntax

ip ssh connection-rate-limit 1-60

Parameters

1-60 Enter the number of maximum numbers of incoming SSH connections allowed per

minute. The range is from 1 to 60 per minute. The default is 10 per minute.

Defaults 10 per minute

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.