Users Guide

Similarly, if you have congured either IPv4 or IPv6 specic ltering on a terminal line, you cannot apply generic IP

ACLs on top of this conguration. Before applying the generic ACL conguration, rst undo the existing

conguration using the no access-class access-list-name [ipv4 | ipv6] command.

clear counters ip access-group

Erase all counters maintained for access lists.

Syntax

clear counters ip access-group [access-list-name]

Parameters

access-list-name (OPTIONAL) Enter the name of a congured access-list, up to 140 characters.

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

7.8.1.0 Increase the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up to

16 characters long.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.2.1.1 Introduced on the E-Series.

ip access-group

Assign an IP access list (IP ACL) to an interface.

Syntax

[vrf vrf-name]ip access-group access-list-name {in | out} [implicit-permit

optimized]

Access Control Lists (ACL) 183