Users Guide

pfc-nodrop-priority l2-dlf drop
Congure to drop the unknown unicast packets ooding on lossless priorities.
Syntax
pfc-nodrop-priority l2-dlf drop
To disable the feature, use the no pfc-nodrop-priority l2-dlf drop command.
Parameters
l2-dlf Enter the keywords l2-dlf to drop ooding trac on lossless priorities.
drop Enter the keyword drop to enable the drop action.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, S6000, S6000–ON, Z9100–ON and S6100–ON.
Related Commands show hardware pfc-nodrop-priority — displays the packets drop count corresponding to the priority.
pfc no-drop queues
Congure the port queues that still function as no-drop queues for lossless trac.
Syntax
pfc no-drop queues queue-range
To remove the no-drop port queues, use the no pfc no-drop queues command.
Parameters
queue-range Enter the queue range. Separate the queue values with a comma; specify a priority range
with a dash; for example, pfc no-drop queues 1,3 or pfc no-drop queues 7
or pfc no-drop queues 0,7. The range is from 0 to 3.
Defaults No lossless queues are congured.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
448 Data Center Bridging (DCB)