Users Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
Usage Information
You cannot enter this command on a unit which is already online.
The system which is currently oine reboots when the online command is given.
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
clear hardware stack-unit
Clear statistics from selected hardware components.
Syntax
clear hardware stack-unit id {counters | cpu {data-plane statistics | i2c
statistics | sata-interface statistics} | unit number counters | stack-port
stack-port-number}
Parameters
stack-unit id Enter the keywords stack-unit then a number to select a particular stack member and
then enter one of the following command options to clear a specic collection of data.
The range is from 1 to 6.
counters Enter the keyword counters to clear the counters on the selected stack member.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to clear the data plane statistics.
cpu i2c statistics Enter the keywords cpu i2c statistics to clear the i2c devices statistics.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics to clear the management
statistics.
cpu sata-interface
statistics
Enter the keywords cpu sata-interface statistics to clear the sata interface
statistics.
stack-port Enter the keywords stack-port then the port number of the stacking port to clear the
statistics of the particular stacking port.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
482 Debugging and Diagnostics