Users Guide
To undo the host name server to IP address mapping for VRFs, use the no ip host [vrf vrf-name] name
ip-address command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF to congure the name
server to IP address mapping for that VRF.
name Enter the name od the host to be associated with an IP address.
ip-address Enter the IP address of the name server in dotted decimal format.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information Use this command to create a mapping between a host name server and its IP addresses for a specic VRF.
Example
Dell(conf)# ip host vrf jay dell 1.1.1.1
clear host
Removes one or all dynamically learned host table entries for a specic VRF.
Syntax
clear host [vrf vrf-name] {* | host-name}
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF to delete dynamically
learned host table entries corresponding to that VRF.
host-name Enter the name of the host corresponding to which you want to delete the dynamically
learnt host table entries.
* Enter * to delete all host table entries.
Defaults None
Command Modes EXEC
Dynamic Host Conguration Protocol (DHCP) 547