Users Guide
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.3.0.0 Introduced on the S6000.
9.2(1.0) Introduced on the Z9500.
Usage Information
To enable routing of RRoCE packets, the VLAN ID is mapped to the default VLAN ID of 4095 and this mapping is
performed using VLAN translation. After VLAN translation, the RRoCE packets are considered in the same manner
as normal IP packets that received on L3 interface and routed in the egress direction. At the egress interface, the
VLAN ID is appended to the packet and transmitted out of the interface as a tagged packet with the dot1Q value
preserved. The dot1Q value is preserved only for egress interfaces that are associated with a VLAN or a lite-
subinterface . If a Layer 3 interface is congured without the encapsulation 802.1Q VLAN ID or is an untagged
interface in a VLAN , the dot1Q value is not preserved .
Flex Hash and Optimized Boot-Up 561