Users Guide
p-snooping port-mode fcoe-trusted
Congure the port for bridge-to-bridge links. It is not recommended to use this command because multi-hop FSB is not supported.
Syntax
fip-snooping port-mode fcoe-trusted
To remove the bridge-to-bridge link conguration from the port, use the no fip-snooping port-mode
fcoe-trusted command.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) This command is deprecated.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
Usage Information
NOTE: This command is deprecated from the Dell Networking OS.
show p-snooping cong
Display the FIP snooping status and congured FC-MAP values.
Syntax
show fip-snooping config
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
FIP Snooping 569