Users Guide
Usage Information The following describes the show fip-snooping enode command shown in the following example.
Field Description
ENode MAC MAC address of the ENode.
ENode Interface Slot/ port number of the interface connected to the ENode.
FCF MAC MAC address of the FCF.
VLAN VLAN ID number the session uses.
FC-ID Fibre Channel session ID the FCF assigns.
Example
Dell# show fip-snooping enode
Enode MAC Enode Interface FCF MAC VLAN FC-ID
--------- --------------- ------- ---- -----
d4:ae:52:1b:e3:cd Te 1/1/1/1 54:7f:ee:37:34:40 100 62:00:11
show p-snooping fcf
Display information on the FCFs in FIP-snooped sessions, including the FCF interface and MAC address, FCF interface, VLAN ID, FC-MAP
value, FKA advertisement period, and number of ENodes connected.
Syntax
show fip-snooping fcf [fcf-mac-address]
Parameters
fcf-mac-address Enter the MAC address of the FCF to display.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information The following describes the show fip-snooping fcf command shown in the following example.
Field Description
FCF MAC MAC address of the FCF.
FIP Snooping 571