Users Guide

• ipv6 nd raguard policy policy-name — dene the RA guard policy name and enter the RA guard policy
conguration mode.
mtu
Enable the verication of the congured maximum transmission unit (MTU) value in the received RA packets.
Syntax
mtu value
To reset the MTU value, use the no mtu value command.
Parameters
value Enter the maximum transmission unit value in bytes. The range is from 1,280 to 11,982
bytes.
Defaults 0
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the C9010.
9.10(0.0) Introduced on the S6100-ON.
9.9(0.0) Introduced on the Z9500.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Related Commands
• ipv6 nd ra-guard enable — congure the RA guard related commands.
• ipv6 nd raguard policy policy-name — dene the RA guard policy name and enter the RA guard policy
conguration mode.
other–cong–ag
Enable the verication of the advertised other conguration parameter. If this command is not congured, the verication process is
bypassed.
Syntax
other-config-flag {on | off}
To reset the other conguration parameter, use the no other-config-flag {on | off} command.
Parameters
on Enter the keyword on to set the other-cong-ag value as ON.
o Enter the keyword off to set the other-cong ag value as OFF.
998 Neighbor Discovery Protocol (NDP)