Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6100-ON

221

222

223

224

225

226

227

228

229

230

NOTE: If you do not enter the allocation values for the CAM regions, the value is 0.

3 Execute write memory and verify that the new settings are written to the CAM on the next boot.

EXEC Privilege mode

show cam-acl

4 Reload the system.

EXEC Privilege mode

reload

Test CAM Usage

To determine whether sucient CAM space is available to enable a service-policy, use the test-cam-usage command. To verify the

actual CAM space required, create a Class Map with all required ACL rules, then execute the test cam-usage command in Privilege

mode. The Status column in the command output indicates whether or not you can enable the policy.

Example of the test cam-usage Command

Dell#test cam-usage service-policy input test-cam-usage stack-unit 2 po 0

------------------------------------------------------------------------------------

2 | 0 |IPv4Flow |192 |3 |Allowed (64)

Dell#

View CAM-ACL Settings

The show cam-acl command shows the cam-acl setting that will be loaded after the next reload.

Example of Viewing CAM-ACL Settings

Dell#show cam-acl

-- Chassis Cam ACL --

Current Settings(in block sizes) Next Boot(in block sizes)

1 block = 256 entries

L2Acl : 2 2

Ipv4Acl : 2 2

Ipv6Acl : 0 3

Ipv4Qos : 2 2

L2Qos : 2 0

L2PT : 0 0

IpMacAcl : 1 0

VmanQos : 0 0

EtsAcl : 0 0

FcoeAcl : 0 0

ipv4pbr : 0 0

vrfv4Acl : 0 0

Openflow : 0 0

fedgovacl : 0 0

nlbclusteracl: 0 0

-- stack-unit 1 --