Users Guide

Create a Single-Range
The following is an example of a single range.
Example of the interface range Command (Single Range)
Dell(config)# interface range tengigabitethernet 1/1/1/1 - 1/1/2/3
Dell(config-if-range-te-1/1/1/1-1/1/2/3)# no shutdown
Dell(config-if-range-te-1/1/1/1-1/1/2/3)#
Dell(config)# interface range hundredGigE 1/1/1-1/1/8
Dell(config-if-range-te-1/1/1-1/1/8)# no shutdown
Dell(config-if-range-te-1/1/1-1/1/8)#
Create a Multiple-Range
The following is an example of multiple range.
Example of the interface range Command (Multiple Ranges)
Dell(conf)#interface range tengigabitethernet 1/1/2/1 - 1/1/5/1 , tengigabitethernet 1/1/1/1 ,
vlan 1
Dell(conf-if-range-te-1/1/2/1-1/1/5/1,te-1/1/1/1,vl-1)#
Exclude Duplicate Entries
The following is an example showing how duplicate entries are omitted from the interface-range prompt.
Example of the Interface-Range Prompt for Duplicate Interfaces
Dell(conf)#interface range vlan 1 , vlan 1 , vlan 3 , vlan 3
Dell(conf-if-range-vl-1,vl-3)#
Dell(conf)#interface range tengigabitethernet 1/1/2/1 - 1/1/3/4 , tengigabitethernet 1/1/2/1 -
1/1/3/4 , tengigabitethernet 1/1/2/1 - 1/1/3/4
Dell(conf-if-range-te-1/1/2/1-1/1/3/4)#
Exclude a Smaller Port Range
The following is an example show how the smaller of two port ranges is omitted in the interface-range prompt.
Example of the Interface-Range Prompt for Multiple Port Ranges
Dell(conf)#interface range tengigabitethernet 1/1/1/1 - 1/1/4/2 , tengigab 1/1/1/1 - 1/1/2/2
Dell(conf-if-range-te-1/1/1/1-1/1/4/2)#
Overlap Port Ranges
The following is an example showing how the interface-range prompt extends a port range from the smallest start port number to the
largest end port number when port ranges overlap. handles overlapping port ranges.
Example of the Interface-Range Prompt for Overlapping Port Ranges
Dell(conf)#interface range tengigabitethernet 1/1/1/1 - 1/1/3/3 , te 1/1/2/1 - 1/1/4/4
Dell(conf-if-range-te-1/1/1/1-1/1/4/4)#
376
Interfaces