Manualshelf

Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6100-ON
341342343344345346347348349350
Neighbor parameters:
TX: 200ms, RX: 200ms, Multiplier: 3
Actual parameters:
TX: 200ms, RX: 200ms, Multiplier: 3
Role: Active
Delete session on Down: True
VRF: VRF_blue
Client Registered: OSPF
Uptime: 00:00:15
Statistics:
Number of packets received from neighbor: 78
Number of packets sent to neighbor: 78
Number of state changes: 1
Number of messages from IFA about port state change: 0
Number of messages communicated b/w Manager and Agent: 4
Session Discriminator: 6
Neighbor Discriminator: 1
Local Addr: 7.1.1.1
Local MAC Addr: 00:a0:c9:00:00:02
Remote Addr: 7.1.1.2
Remote MAC Addr: 34:17:98:34:00:12
Int: TenGigabitEthernet 1/1/1/1
State: Up
Configured parameters:
TX: 200ms, RX: 200ms, Multiplier: 3
Neighbor parameters:
TX: 200ms, RX: 200ms, Multiplier: 3
Actual parameters:
TX: 200ms, RX: 200ms, Multiplier: 3
Role: Active
Delete session on Down: True
VRF: VRF_blue
Client Registered: OSPF
Uptime: 00:00:14
Statistics:
Number of packets received from neighbor: 73
Number of packets sent to neighbor: 73
Number of state changes: 1
Number of messages from IFA about port state change: 0
Number of messages communicated b/w Manager and Agent: 4
Related
Commands
● bfd all-neighbors — establish BFD sessions with all neighbors discovered by the IS-IS protocol or
OSPF protocol out of all interfaces.
vrrp bfd
Establish a VRRP BFD session.
Syntax
vrrp bfd {all-neighbors | neighbor ip-address} [interval interval min_rx
min_rx multiplier value role {active | passive}]
To undo your VRRP BFD configuration, use the no vrrp bfd {all-neighbors | neighbor ip-
address } [interval interval min_rx min_rx multiplier value role {active |
passive}] command.
Parameters
all-neighbors Establish BFD sessions with all BFD neighbors on an interface.
neighbor
ip-
address
Enter the IP address of the BFD neighbor.
interval
milliseconds
(OPTIONAL) Enter the keyword interval to specify non-default BFD session
parameters beginning with the transmission interval. The range is 50 to 1000. The
default is 100.
Bidirectional Forwarding Detection (BFD) 341