Administrator Guide

min_rx
milliseconds
Enter the keyword min_rx to specify the minimum rate at which the local system
would like to receive control packets from the remote system. The range is 50 to
1000. The default is 100.
multiplier Enter the keyword multiplier to specify the number of packets that must be
missed in order to declare a session down. The range is 3 to 50. The default is 3.
role [active |
passive]
Enter the role that the local system assumes:
● Active—The active system initiates the BFD session. Both systems can be
active for the same session.
● Passive—The passive system does not initiate a session. It only responds to a
request for session initialization from the active system.
The default is Active.
Defaults See Parameters.
Command Modes INTERFACE
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
342 Bidirectional Forwarding Detection (BFD)