Users Guide

Figure 156. Port-to-VLAN mappings
3 Under the Networks tab, create an L2 domain. Under the L2 domain, create a logical network (VNI) and add access ports of the VTEP
in the logical network.
Figure 157. Access ports of the VTEP
Conguring VxLAN Gateway
To congure the VxLAN gateway on the switch, follow these steps:
1 Connecting to NVP controller
2 Advertising VXLAN access ports to controller
Connecting to an NVP Controller
To connect to an NVP controller, use the following commands.
1 Enable the VXLAN feature.
CONFIGURATION mode
feature vxlan
You must congure feature VXLAN to congure vxlan-instance.
2 Create a VXLAN instance that connects to the controller.
CONFIGURATION mode
Virtual Extensible LAN (VXLAN)
1079