Users Guide

To display PIM neighbors for each interface, use the show {ip | ipv6} pim neighbor [detail] command EXEC Privilege
mode.
Following is an example of show ip pim neighbor command output:
DellEMC#show ip pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Prio/Mode
127.87.5.5 Hu 1/1/1 01:44:59/00:01:16 v2 1 / S
127.87.3.5 Hu 1/1/2 01:45:00/00:01:16 v2 1 / DR
127.87.50.5 Hu 1/1/3 00:03:08/00:01:37 v2 1 / S
DellEMC#
Following is an example of show ipv6 pim neighbor command output:
DellEMC#show ipv6 pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Prio/Mode
fe80::201:e8ff:fe02:140f Hu 1/1/1 01:44:59/00:01:16 v2 1 / S
fe80::201:e8ff:fe00:6265 Hu 1/1/2 01:45:00/00:01:16 v2 1 / DR
DellEMC#
To display the PIM routing table, use the show {ip | ipv6} pim tib [group-address [source-address]] command from
EXEC privilege mode.
Following is an example of show ip pim tib command output:
DellEMC#show ip pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT,
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 192.1.2.1), uptime 00:29:36, expires 00:03:26, RP 10.87.2.6, flags: SCJ
Incoming interface: hundredGigE 1/2/1, RPF neighbor 10.87.3.5
Outgoing interface list:
hundredGigE 1/1/1
hundredGigE 1/3/1
(10.87.31.5, 192.1.2.1), uptime 00:01:24, expires 00:02:26, flags: FT
Incoming interface: hundredGigE 1/4/1, RPF neighbor 0.0.0.0
Outgoing interface list:
hundredGigE 1/1/1
hundredGigE 1/2/1
hundredGigE 1/3/1
--More--
Following is an example of show ipv6 pim tib command output:
DellEMC#show ipv6 pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT,
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, ff0e::225:1:2:1), uptime 00:29:36, expires 00:03:26, RP 10.87.2.6, flags: SCJ
Incoming interface: hundredGigE 1/12/1, RPF neighbor 35::1
Outgoing interface list:
hundredGigE 1/11/1
hundredGigE 1/13/1
(25::1, ff0e::225:1:2:1), uptime 00:01:24, expires 00:02:26, flags: FT
Incoming interface: hundredGigE 1/10/1, RPF neighbor 35::1
Outgoing interface list:
PIM Sparse-Mode (PIM-SM)
697