Administrator Guide

Related
Commands
• service-class dot1p-mapping — Identifies the class map.
wred enable
Enable weighted random early detection (WRED) globally.
Syntax
wred enable
To disable WRED globally, use the no wred enable command.
Defaults Enabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced on the S6000, S6100–ON, and Z9100–ON.
Usage Information
By default, WRED is enabled on the system. To disable it globally, use the no WRED enable command.
The system does not show the WRED enable command in the running-configuration or startup-configuration.
The system writes this configuration to the running-configuration or startup-configuration only when you use the
no WRED enable command.
Related
Commands
• wred-profile — creates a WRED profile and name that profile.
Per-Port QoS Commands
Per-port QoS (port-based QoS) allows you to define the QoS configuration on a per-physical-port basis.
dot1p-priority
Assign a value to the IEEE 802.1p bits on the traffic this interface receives.
Syntax
dot1p-priority priority-value
To delete the IEEE 802.1p configuration on the interface, use the no dot1p-priority command.
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
Quality of Service (QoS) 1199