Administrator Guide

Parameters
level-1 You can form a Level 1 adjacency if there is at least one common area address between
this system and neighbors. You cannot form Level 2 adjacencies on this interface.
level-1-2 You can form a Level 1 and Level 2 adjacencies when the neighbor is also configured as
Level-1-2 and there is at least one common area, if not, a Level 2 adjacency is established.
This setting is the default.
level-2-only You can form a Level 2 adjacencies when other Level 2 or Level 1-2 routers and their
interfaces are configured for Level 1-2 or Level 2. Level 1 adjacencies cannot be
established on this interface.
Defaults level-1-2
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information
Because the default establishes Level 1 and Level 2 adjacencies, you do not need to configure this command.
Routers in an IS-IS system must be configured as a Level 1-only, Level 1-2, or Level 2-only system.
Only configure interfaces as Level 1 or Level 2 on routers that are between areas (for example, a Level 1-2 router)
to prevent the software from sending unused hello packets and wasting bandwidth.
isis csnp-interval
Configure the IS-IS complete sequence number PDU (CSNP) interval on an interface.
Syntax
isis csnp-interval seconds [level-1 | level-2]
To return to the default values, use the no isis csnp-interval [seconds] [level-1 | level-2]
command.
Parameters
seconds Interval of transmission time between CSNPs on multi-access networks for the
designated intermediate system. The range is from 0 to 65535. The default is 10.
level-1 (OPTIONAL) Independently configures the interval of time between transmission of
CSNPs for Level 1.
level-2 (OPTIONAL) Independently configures the interval of time between transmission of
CSNPs for Level 2.
Defaults seconds = 10; level-1 (if not otherwise specified)
Intermediate System to Intermediate System (IS-IS) 815