Administrator Guide
metric
metric-
value
(OPTIONAL) Assign a value to the redistributed route. The range is from 0 to 16777215.
The default is 0. Use a value that is consistent with the destination protocol.
metric-type
{external |
internal}
(OPTIONAL) The external link type associated with the default route advertised into a
routing domain. Specify one of the following:
• external
• internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 1 routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes. This
setting is the default.
route-map
map-
name
(OPTIONAL) If you do not enter the route-map argument, all routes are redistributed. If a
map-name value is not specified, no routes are imported.
Defaults
• metric metric-value = 0
• metric-type= internal; level-2
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added support for IPv6 ISIS.
6.3.1.0 Introduced.
Usage Information
To redistribute a default route (0.0.0.0/0), configure the default-information originate command.
Changing or disabling a keyword in this command does not affect the state of the other command keywords.
When an LSP with an internal metric is received, the Dell EMC Networking OS considers the route cost while
considering the advertised cost to reach the destination.
Redistributed routing information is filtered with the distribute-list out command to ensure that the
routes are properly passed to the receiving routing protocol.
How a metric value assigned to a redistributed route is advertised depends on how on the configuration of the
metric-style command. If the metric-style command is set for Narrow or Transition mode and the
metric value in the redistribute command is set to a number higher than 63, the metric value advertised in
Intermediate System to Intermediate System (IS-IS) 833