Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6100-ON

991

992

993

994

995

996

997

998

999

1000

show ipv6 neighbors

Display IPv6 discovery information. Entering the command without options shows all IPv6 neighbor addresses stored on the control

processor (CP).

Syntax

show ipv6 neighbors [vrf vrf-name] [ipv6-address| interface interface]

Parameters

vrf

vrf-name

(OPTIONAL) Enter the keyword vrf and the name of the VRF to display the neighbors

corresponding to that VRF.

NOTE: If you do not specify this option, neighbors corresponding to the

default VRF are displayed.

ipv6-address

Enter the IPv6 address of the neighbor in the x:x:x:x::x format.

NOTE: The :: notation specifies successive hexadecimal fields of zero.

interface

Enter the keyword interface then the interface type and slot/port or number

information:

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the stack/slot/port/subport information.

• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the

stack/slot/port/subport information.

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/

slot/port[/subport] information.

• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/

slot/port/subport information.

• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the

stack/slot/port information.

• For a Management interface, enter the keyword managementethernet followed by

slot/port numbers.

• For a Port Channel interface, enter the keywords port-channel followed by a number.

• For a port channel interface, enter the keywords port-channel then a number.

• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Defaults None

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Added support for VRF. Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

994 Neighbor Discovery Protocol (NDP)