Install Guide

Specications

This topic lists the S6100–ON specications.

CAUTION: Operate the product at an ambient temperature not higher than 113°F (45°C).

CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same

or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.

NOTE: For RoHS information, see Restricted Material Compliance.

Topics:

• Chassis physical design

• IEEE standards

• Agency compliance

• USA Federal Communications Commission (FCC) statement

• European Union EMC Directive Conformance statement

• Japan: VCCI Compliance for Class A Equipment

• Korean Certication of Compliance

• Safety Standards and Compliance Agency Certications

• Electromagnetic Compatibility (EMC)

• Product recycling and disposal

Chassis physical design

Table 10. Chassis physical design

Parameter Specications

Height 3.50 inches (88.9 mm)

Width 17.1 inches (434.3 mm)

Depth 18 inches (457.2 mm)

Chassis Weight with Factory-Installed Components 44 lbs (20 kg)—with two PSUs and four I/O modules

Rack Clearance Required

Front: 5 inches (12.7 cm)

Rear: 5 inches (12.7 cm)

Table 11. Environmental Parameters

Parameter Specications

Operating Temperature 32° to 113°F (0° to 45°C)

Operating Humidity 5 to 95 percent (RH), non-condensing

Storage Temperature –40° to 158°F (–40° to 70°C)

46 Specications