Setup Guide

Technical Specifications

This chapter lists the S6100–ON specifications.

NOTE: Operate the system at an ambient temperature not higher than

113°F (45°C).

CAUTION: Lithium Battery Caution: To avoid the possibility of an

explosion, always replace the battery correctly.

NOTE: Replace the battery only with the same or an equivalent type.

Dispose of the batteries according to the manufacturer's instructions.

Table 3. S6100–ON Chassis Physical Design

Parameter Specifications

Height 3.50 inches (88.9 mm)

Width 17.1 inches (434.3 mm)

Depth 18 inches (457.2 mm)

Chassis weight with factory-installed

components

44 lbs (20 kg) (with two PSUs and

four I/O modules)

Rack clearance required

Front: 5 inches (12.7 cm)

Back: 5 inches (12.7 cm)

Table 4. Environmental Parameters

Parameter Specifications

Operating temperature 32° to 113°F (0° to 45°C)

Operating humidity 5 to 95 percent (RH), noncondensing

Storage temperature –40° to 158°F (–40° to 70°C)

Storage and nonoperating humidity 5 to 95 percent (RH), noncondensing

Thermal output

Typical: 1170.4 BTH/hr (343 W)

Technical Specifications