Users Guide

Figure 76. LLDP-MED Capabilities TLV
Table 49. Dell Networking OS LLDP-MED Capabilities
Bit Position TLV Dell Networking OS Support
0 LLDP-MED Capabilities Yes
1 Network Policy Yes
2 Location Identication Yes
3 Extended Power via MDI-PSE Yes
4 Extended Power via MDI-PD No
5 Inventory No
6–15 reserved No
Table 50. LLDP-MED Device Types
Value Device Type
0 Type Not Dened
1 Endpoint Class 1
2 Endpoint Class 2
3 Endpoint Class 3
4 Network Connectivity
5–255 Reserved
LLDP-MED Network Policies TLV
A network policy in the context of LLDP-MED is a device’s VLAN conguration and associated Layer 2 and Layer 3 congurations.
LLDP-MED network policies TLV include:
• VLAN ID
• VLAN tagged or untagged status
• Layer 2 priority
• DSCP value
An integer represents the application type (the Type integer shown in the following table), which indicates a device function for which a
unique network policy is dened. An individual LLDP-MED network policy TLV is generated for each application type that you specify with
the Dell Networking OS CLI (Advertising TLVs).
NOTE
: As shown in the following table, signaling is a series of control packets that are exchanged between an endpoint device
and a network connectivity device to establish and maintain a connection. These signal packets might require a dierent network
policy than the media packets for which a connection is made. In this case, congure the signaling application.
Link Layer Discovery Protocol (LLDP) 481