Users Guide

PROTOCOL MSTP mode
msti
Specify the keyword vlan then the VLANs that you want to participate in the MSTI.
Examples of Conguring and Viewing MSTI
The following examples shows the msti command.
Dell(conf)#protocol spanning-tree mstp
Dell(conf-mstp)#msti 1 vlan 100
Dell(conf-mstp)#msti 2 vlan 200-300
Dell(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
MSTI 1 VLAN 100
MSTI 2 VLAN 200-300
All bridges in the MSTP region must have the same VLAN-to-instance mapping.
To view which instance a VLAN is mapped to, use the show spanning-tree mst vlan command from EXEC Privilege mode.
Dell(conf-mstp)#name my-mstp-region
Dell(conf-mstp)#exit
Dell(conf)#do show spanning-tree mst config
MST region name: my-mstp-region
Revision: 0
MSTI VID
1 100
2 200-300
To view the forwarding/discarding state of the ports participating in an MSTI, use the show spanning-tree msti command from
EXEC Privilege mode.
Inuencing MSTP Root Selection
MSTP determines the root bridge, but you can assign one bridge a lower priority to increase the probability that it becomes the root bridge.
To change the bridge priority, use the following command.
• Assign a number as the bridge priority.
PROTOCOL MSTP mode
msti instance bridge-priority priority
A lower number increases the probability that the bridge becomes the root bridge.
The range is from 0 to 61440, in increments of 4096.
The default is 32768.
Example of Assigning and Verifying the Root Bridge Priority
By default, the simple conguration shown previously yields the same forwarding path for both MSTIs. The following example shows how
R3 is assigned bridge priority 0 for MSTI 2, which elects a dierent root bridge than MSTI 2.
To view the bridge priority, use the show config command from PROTOCOL MSTP mode.
R3(conf-mstp)#msti 2 bridge-priority 0
1d2h51m: %RPM0-P:RP2 %SPANMGR-5-STP_ROOT_CHANGE: MSTP root changed for instance 2. My
Bridge ID: 0:0001.e809.c24a Old Root: 32768:0001.e806.953e
New Root: 0:0001.e809.c24a
R3(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
Multiple Spanning Tree Protocol (MSTP)
523