White Papers

Conguring UFT Modes
To congure the Unied Forwarding Table (UFT) modes, follow these steps.
1 Select a mode to initialize the maximum scalability size for L2 MAC table or L3 Host table or L3 Route table.
CONFIGURATION
hardware forwarding-table mode
DellEMC(conf)#hardware forwarding-table mode ?
scaled-l2-switch Forwarding table mode for scaling L2 Switch entries
scaled-l3-hosts Forwarding table mode for scaling L3 host entries
scaled-l3-routes Forwarding table mode for scaling L3 route entries
DellEMC(conf)#hardware forwarding-table mode scaled-l3-hosts
Hardware forwarding-table mode is changed. Save the configuration and reload to take effect.
DellEMC(conf)#end
DellEMC#write memory
!
Apr 26 14:37:16: %STKUNIT1-M:CP %FILEMGR-5-FILESAVED: Copied running-config to startup-
config in flash by admin
DellEMC#
2 Display the hardware forwarding table mode in the current boot and in the next boot.
EXEC Privilege
show hardware forwarding-table mode
DellEMC#show hardware forwarding-table mode
Current Settings Next Boot Settings
Mode : Default scaled-l3-hosts
L2 MAC Entries : 72K 8K
L3 Host Entries : 72K 136K
L3 Route Entries : 16K 16K
246
Content Addressable Memory (CAM)