White Papers

startup-conguration from an Dell EMC Networking OS version in which you have congured ntp authentication-key, the system
cannot correctly decrypt the key and cannot authenticate the NTP packets. In this case, re-enter this command and save the running-
cong to the startup-cong.
To congure NTP authentication, use the following commands.
1 Enable NTP authentication.
CONFIGURATION mode
ntp authenticate
2 Set an authentication key.
CONFIGURATION mode
ntp authentication-key number md5 key
Congure the following parameters:
• number: the range is from 1 to 4294967295. This number must be the same as the number in the ntp trusted-key
command.
• key: enter a text string. This text string is encrypted.
3 Dene a trusted key.
CONFIGURATION mode
ntp trusted-key number
Congure a number from 1 to 4294967295.
The number must be the same as the number used in the ntp authentication-key command.
4 Congure an NTP server.
CONFIGURATION mode
ntp server [vrf] <vrf-name> {hostname | ipv4-address |ipv6-address} [ key keyid] [prefer]
[version number]
Congure the IP address of a server and the following optional parameters:
• • vrf-name : Enter the name of the VRF through which the NTP server is reachable.
• hostname : Enter the keyword hostname to see the IP address or host name of the remote device.
• ipv4-address : Enter an IPv4 address in dotted decimal format (A.B.C.D).
• ipv6-address : Enter an IPv6 address in the format 0000:0000:0000:0000:0000:0000:0000:0000. Elision of zeros is
supported.
• key keyid : Congure a text string as the key exchanged between the NTP server and the client.
• prefer: Enter the keyword prefer to set this NTP server as the preferred server.
• version number : Enter a number as the NTP version. The range is from 1 to 4.
5 Congure the switch as NTP master.
CONFIGURATION mode
ntp master <stratum>
To congure the switch as NTP Server use the ntp master<stratum> command. stratum number identies the NTP Server's
hierarchy.
Examples of Conguring and Viewing an NTP Conguration
The following example shows conguring an NTP server.
R6_E300(conf)#1w6d23h : NTP: xmit packet to 192.168.1.1:
leap 0, mode 3, version 3, stratum 2, ppoll 1024
934
System Time and Date